Shell geometry
Length, width, depth and corner radii come from the 3D drawing, with 1.5 mm clearance on every side and the parting line placed on the least visible face.
A mould is what makes a case fit one device. We draw the shell in 3D from your sample or files, cut a CNC master in tooling board or aluminium, and press the first shell in a compression mould. Tooling runs 15–20 days and US$600–1,400, credited at 2,000 pcs. Before any of that we check the 300+ moulds already on file.
We start from the device itself or a 3D file: external dimensions, corner radii, port and button positions, and 1.5 mm clearance on every side. A 3D drawing comes back within 3 days with the parting line, the 5 mm wall thickness and the insert cavity marked. You approve the drawing before any steel is cut. If you have no file, we measure your sample with calipers to 0.1 mm and send the drawing for confirmation.
The master is cut on a CNC router from laminated wooden tooling board or from aluminium. The wooden pattern suits a 300–500 pcs run and costs less; aluminium holds a sharper edge for 2,000+ pcs and a 0.6 mm emboss. The master is then pressed into a steel female mould, and the first shells come off that press, not from a hand-laminated mock-up. A new master takes 5–7 days of machining; a revision after a fit check adds 3 days, which is why the drawing sign-off matters.
A drawing that ignores any one of these comes back as a case the device does not sit in properly.
Length, width, depth and corner radii come from the 3D drawing, with 1.5 mm clearance on every side and the parting line placed on the least visible face.
The cavity is cut 1 mm larger than the device outline and 12 mm deep for 38D foam, so a screen never rests on the zipper tape in transit.
The parting line runs along the base, where a 0.3 mm step hides under the zipper tape. Face fabric is laminated before pressing, never after.
The first-off sample is a finished case, not a bare shell: zipper sewn around the 3D curve, insert die-cut to the device, logo applied, lid closed and latched. We measure overall length, width, depth and the insert cavity against the drawing at ±1.5 mm, and photograph all six faces before the case is couriered to you. The first bulk carton is measured against the same sheet, so a gap between sample and bulk shows up early.
You get the sample, a measurement sheet, the mould number and a photo report. Approve it and bulk runs 20–30 days; reject a dimension and the master is recut before a single shell is pressed. The mould stays in our library under your number, so a reorder skips tooling entirely. That is also why we ask you to check the library first: 300+ shapes are already drawn, and a match saves the whole US$600–1,400.
Masters, cavities and first-offs from recent programmes. Device details are withheld where the customer asked for it.
Aluminium master, 0.6 mm emboss
38D insert, cavity to ±1 mm
CNC cut for a 300–500 pcs run
Measured to ±1.5 mm on six faces
Tooling is the slowest part of a case programme, and the only part you cannot rush with more labor.
A STEP file, a physical sample or a dimensioned drawing. With a sample in hand we measure to 0.1 mm and confirm the numbers with you.
300+ moulds are on file. If one is within 1.5 mm of your device we adjust the insert instead, and the US$600–1,400 tooling disappears. That check takes two working days.
The drawing shows the parting line, wall thickness, cavity and logo position. Changes are free before the CNC master is cut, and cost a recut after.
CNC master, steel mould and first shell in 15–20 days, then a pilot carton measured against the same sheet, so drift shows up before the run is finished.
20–30 days after sample approval at 150,000 pcs a month capacity, shipped FOB Shenzhen or Yantian, CIF or DDP, on 30% deposit and 70% before shipment.
Case prices are FOB Shenzhen at 1,000 pcs. Tooling is a separate one-off line on the invoice and is credited at 2,000 pcs.
US$2.50–5.00 / pc
A mould already in the 300+ library, at 100 pcs per colour, with no tooling charge.
US$600–1,400 tooling
One-off tooling on a new EVA shell, 15–20 day lead time, credited at 2,000 pcs.
US$6.00–12.00 / pc
Large drone, VR and keyboard cases at 2,000 pcs, with the tooling credited in full.
Send the device dimensions. We will tell you within 2 working days whether a mould on file fits, and what a new one would cost.