Custom Logo Hard Cases: Embossed, Printed and Badged

A logo on a moulded EVA case is a process choice, not a label. We run six methods in-house: embossed or debossed foam, heat transfer, silk screen, embroidery, metal plate and rubber or silicone patch. Each has its own minimum line width, setup cost and placement. We strike off your artwork on a real 5 mm EVA shell before bulk.

Logo methods

Six ways to put your logo on a moulded shell

Embossing and debossing press the logo into the 5 mm EVA wall while the shell is still hot, so nothing is added and nothing can peel. Depth runs 0.4–0.8 mm, and the artwork must be vector — AI, EPS or SVG — with every line at least 0.6 mm wide. Raster files and gradients cannot be cut into a steel emboss plate. It is the cheapest mark at volume because it needs no added part.

Heat transfer carries full-colour artwork at 0.1 mm registration; silk screen holds one to three Pantone colours on a flat lid; embroidery adds a stitched patch through the lining; a metal plate screws on with a 0.8 mm rim; a rubber or silicone patch is moulded to the shell curve. Pantone matching happens on the real face material, because the same ink shifts on 1680D nylon and on PU.

  • Vector artwork only: AI, EPS or SVG, all type converted
  • Minimum line 0.6 mm embossed, 0.3 mm silk screen
  • Pantone matched on the actual face material
  • Emboss depth 0.4–0.8 mm on a 5 mm EVA wall
Send Your Design
Embossed logo pressed into a moulded EVA case shell
What decides it

Three things that decide how a logo reads

The same artwork can look sharp on one case and muddy on another. The face material, the method and the signed strike-off decide it.

The face the logo lands on

1680D nylon takes a crisp deboss; PU leather shows a deeper, glossier impression; 600D polyester needs heat transfer because the open weave swallows a 0.6 mm line.

The method that fits the mark

A 6 mm line survives embossing. A 0.3 mm hairline needs silk screen. A 30 mm badge suits a metal plate; a curved lid needs a rubber patch or a split plate.

The strike-off you sign

We press a sample on your actual face material and courier it. You sign the piece, and the line then matches it within ±2 mm. No bulk run starts on an emailed JPEG.

Approval

A physical strike-off, not a digital mock-up

Before bulk we press your logo on the exact face material you ordered and courier the strike-off to you. It takes 3–5 working days once artwork is approved, one revision is included, and you sign the piece that comes back. That signed piece becomes the sealed standard the line is checked against: position within ±2 mm, depth within 0.1 mm. A shadow board and a steel rule gauge sit at the inspection table, so a drifting plate is caught at piece 20.

Placement matters as much as the artwork. A 40–60 mm logo sits centered on the lid; a 25 mm mark goes 15 mm in from the lower corner. Keep 8 mm clear of the zipper seam and never run a logo across the 3 mm shell radius, where a flat plate cannot hold pressure. Inside-lid printing is available and hides scuffs. Send a placement sketch and we return a 1:1 template.

  • Strike-off in 3–5 working days on your face material
  • One artwork revision included per logo
  • Placement held to ±2 mm against the sealed sample
  • Digital proof, 1:1 template and photo report before shipping
Approve a logo strike-off
Inspector checking a logo strike-off against a sealed sample
Portfolio

Moulded cases with logos we have produced

Four methods on four real shells. Every one can be re-run on your case size, face material and colour.

Process

From artwork to shipped cartons

Five steps, and the only one that needs your signature is the strike-off.

01

Send artwork and the case spec

AI, EPS or SVG, plus the case size, face material and target quantity. We confirm which method fits the mark within one working day, with the limitation written down.

02

Choose the method and the quote

You get a costed option per method that suits the face: setup US$80–200 per artwork, unit cost, strike-off date and packing. A metal plate is quoted separately.

03

Approve the strike-off

We press the logo on your ordered material and courier it in 3–5 working days. One revision is included before you sign, and inside-lid printing is checked on the same proof.

04

Bulk production

Moulding, lamination, logo application, zipper and insert run to the signed standard over 20–30 days at 150,000 pcs a month, with inline checks every 20 pieces.

05

Inspection and shipping

Cartons are checked against the sealed sample with photos, then shipped FOB Shenzhen or Yantian, CIF or DDP on 30% deposit and 70% before shipment.

Specs

Logo application specification

Shell
5 mm EVA, 75D, compression moulded
Face material
1680D nylon, 600D polyester, PU leather or jersey
Logo methods
Emboss / deboss, heat transfer, silk screen, embroidery, metal plate, rubber patch
Emboss depth
0.4–0.8 mm; split plate on a curved lid
Minimum line
0.6 mm embossed, 0.3 mm silk screen
Colour matching
Pantone matched on the face material, not on screen
Placement tolerance
±2 mm against the signed strike-off
Logo setup
US$80–200 per artwork; free above 1,000 pcs on emboss, heat transfer and silk screen
MOQ
300 pcs per style (100 pcs per colour on stock moulds)
Lead time
Strike-off 3–5 days; sample 7–10 days on an existing mould; bulk 20–30 days
Budget

Indicative case pricing with one logo

FOB Shenzhen, 1,000 pcs per band, including one logo strike-off and standard packing. Setup is US$80–200 per artwork, free above 1,000 pcs on emboss, heat transfer and silk screen.

Small case

US$2.00–3.50 / pc

Watch, jewellery and thermometer cases at 1,000 pcs.

  • 5 mm EVA, 600D face
  • One-colour silk screen or small deboss
  • Jersey lining, #5 nylon zipper
  • Logo setup US$80–200 per artwork

Large case

US$6.00–12.00 / pc

Drone, VR headset and keyboard cases at 1,000 pcs.

  • 5 mm EVA with a 2 mm internal board
  • Metal plate, rubber patch or embroidery
  • 38D die-cut insert, webbing handle
  • New tooling credited at 2,000+ pcs

Logo questions buyers ask before ordering

What does a logo setup cost?
US$80–200 per artwork for emboss, heat transfer, silk screen, a rubber patch or embroidery digitising. Above 1,000 pcs the setup is free on emboss, heat transfer and silk screen. A metal plate is quoted with its plating and screws.
What artwork files do you need?
Vector AI, EPS or SVG with all type converted to outlines, one Pantone reference per colour, and no line thinner than 0.6 mm for embossing or 0.3 mm for silk screen.
Can you emboss a curved lid?
Yes, to 0.4 mm on a 3 mm lid radius, using a split plate and a silicone pad. Deeper impressions need a flat panel or a metal plate, because a flat plate cannot hold pressure on a steep curve.
How long before I see my logo on a case?
3–5 working days for a strike-off on your face material, then 7–10 days for a full sample on an existing mould, or 15–20 days if the shell needs a new mould.
Can the logo go inside the case?
Yes. Inside-lid printing, an embossed EVA insert and a woven label under the mesh pocket all work. Inside placement is checked on the same strike-off, and it hides scuffs picked up in transit.

Put your logo on a shell you can hold

Send artwork and the case size. We will quote a method, a strike-off date and a unit price within one working day.