Low MOQ Hard Cases From 100 Pieces

Low MOQ is a set of trade-offs, not a discount. At 100 pcs you can have a stock moulded shell, your logo on the lid and a pick-and-pluck insert; you cannot have a new shell shape or a new colour face. This page sets out what each quantity buys — 100, 300, 500 and 2,000 pcs — and where the tooling cost lands.

What 100 pcs buys

A stock mould, your logo, and no tooling invoice

We hold 300+ moulds in Shijie Town, so a low-MOQ order starts by matching your device to one of them instead of cutting a new shell. That removes the US$600–1,400 tooling line from the quote entirely. You then choose the fabric face, the lining, the zipper and the insert, and we print or emboss your logo. Sampling runs 7–10 days because the mould already exists.

At 100 pcs the set-up, the print screen and the freight divide by a hundred units instead of a thousand. A medium stock case at 1,000 pcs lands at US$2.50–5.00 FOB; at 100 pcs the same 5 mm shell carries more of that fixed cost per unit. You still get saleable product, a real unit cost, and no mould invoice at all.

  • 100 pcs per colour on a stock mould
  • 300+ moulds already cut, sampling in 7–10 days
  • Logo: heat transfer, silk screen, embossing or a metal plate
  • Bulk production 20–30 days after sample approval
Send your device outline
EVA shell being hot-pressed over a stock mould
Three levers

What you can actually change at 100 pieces

Pick the shell from stock, then spend the budget on the two things a buyer sees first: the face and the insert.

The shell

Fixed by the mould. 5 mm EVA, 75D, hot-pressed to 1680D nylon, PU leather or jersey. Choosing from 300+ existing moulds is what removes the tooling cost at 100 pcs.

The face

The outer material swaps on a stock mould: 1680D nylon, 600D polyester, PU leather or jersey. A brand-new colour face needs 300 pcs, since the face fabric is dyed to order.

The insert

Pick-and-pluck foam needs no die, so it works from 100 pcs. A die-cut insert is the step that waits for 500 pcs, because a steel-rule die has to be cut first.

What you get back

Small orders pass the same inspection gates

A 100 pcs run is not a sample run. It passes the same gates as a 150,000 pcs month: an inline check at every 20th piece, an AQL 2.5 final inspection, and a 1.2 m drop test on six faces with the device loaded. Photo pages from the inspection go out with the carton list, and the sealed sample stays on file.

Packing is where small orders get thin, and yours does not. Polybag or EVA mesh pocket, a printed hang tag, a barcode sticker if your warehouse needs one, and 25 pcs per carton. Each carton is weighed, photographed and marked with your SKU, so a receiving team can count it in minutes. Payment terms are 30% deposit and 70% before shipment, T/T, with FOB, CIF or DDP freight quoted per order.

  • AQL 2.5 inspection with a photo report
  • 1.2 m drop test on six faces, device inside
  • 25 pcs per carton, barcode sticker on request
  • 30% deposit, 70% before shipment
See the inspection list
Cartons of low-MOQ hard cases being packed for export
Real orders

Low-volume cases we have shipped

Four programmes from 100 to 2,000 pcs, each with a custom face and insert.

Process

Five steps from first message to a 100-piece carton

A stock-mould order usually ships 35–45 days after the deposit clears.

01

Match the mould

Send the device outline, weight and target retail price. We reply with two or three stock moulds that fit, listing internal dimensions in mm and the face options for each.

02

Quote with tooling shown

The quote separates shell, face, insert, print and tooling, so you can see exactly what moving from 100 to 300 pcs would remove from the unit price.

03

Sample in 7–10 days

A stock-mould sample takes 7–10 days with your face, lining and logo. A new mould adds 15–20 days before sampling even starts, so a new shell shape rarely suits a first order.

04

Run 20–30 days

Bulk production runs 20–30 days after sample approval, with an inline check at every 20th piece, an AQL 2.5 final inspection and a photo report before the cartons close.

05

Ship and reorder

We keep the print screen and the insert die on file, so a reorder needs no new sample round — only a quantity and a delivery date.

Specs

What is possible at each quantity

Four quantities, four different sets of options. Below 100 pcs the run goes through the sample department at sample cost.

MOQ
100 pcs per colour on a stock mould; 300 pcs per style for a new face
Shell
5 mm 75D EVA, hot-pressed; 300+ stock moulds, from watch to drone size
Face material
1680D nylon, 600D polyester, PU leather, jersey, 2 mm EVA
Lining
Velvet, jersey, 1680D nylon or 2 mm EVA, bonded with hot-melt film
Zipper
YKK nylon coil or waterproof, 5,000-cycle test, custom puller
Logo
Heat transfer, silk screen, embossing, rubber patch or metal plate
Insert
Pick-and-pluck from 100 pcs; die-cut EVA from 500 pcs; moulded cavity from 2,000 pcs
Lead time
Sampling 7–10 days on a stock mould, 15–20 days with a new one; bulk 20–30 days
Pricing

What 100, 300 and 500 pieces cost

FOB Shenzhen, medium case, 5 mm EVA shell, insert fitted and your logo applied. The quantity is on every line. At 2,000+ pcs a new mould is US$600–1,400 one-off, credited against the run.

100 pcs

US$3.40 / pc

Stock mould, one face colour, pick-and-pluck insert, heat-transfer logo.

  • 100 pcs per colour
  • 20 mm pick-and-pluck insert
  • 1-colour heat-transfer logo
  • Polybag and 25 pcs carton

500+

US$2.60 / pc

500–1,999 pcs, stock mould, new colour face, a new die-cut insert and a custom zipper puller.

  • 500 pcs pays for a new insert die
  • 38D die-cut insert, ±2 mm
  • Custom zipper puller and lining
  • Drop-tested with the device loaded

Low-MOQ questions

The five questions that come up before a first small order.

Can I order fewer than 100 hard cases?
We mould 100 pcs per colour on a stock mould. Below that, set-up, print and freight do not divide into a sensible unit price, so 100 pcs is the floor we quote.
What can I change at 100 pieces?
The logo, the lining, the insert and the zipper puller. The shell outline, the mould and the fabric colour are fixed by the stock mould you choose from the 300+ library.
How long does a 100-piece order take?
Sampling 7–10 days on a stock mould, bulk 20–30 days after approval, then 25–35 days by sea or 5–8 days by air.
When does tooling get charged?
A new steel-rule insert die is charged once at 500 pcs and reused on every reorder. A new compression mould at US$600–1,400 is credited against a 2,000+ pcs run.
Are small runs tested the same way?
Yes. 1.2 m drop on six faces, a 5,000-cycle zipper test and an AQL 2.5 inspection — the same gates a 150,000 pcs month passes, with a photo report per carton.

Test a market with 100 cases, not a mould

Send a device outline and the retail price you want to hit. We will name the stock mould, the insert and the quantity that keeps the unit cost sane.